Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Green Renewable Energy Forum
Solar PV Forum
Help with my setup
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Talk Electrician Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Andy1733" data-source="post: 526382" data-attributes="member: 34898"><p>My set-up. </p><p>Main electric connection (main fuse) enters my house in the kitchen. This goes through the smart metre then the tails split via Henley blocks. One tail goes to my house consumer unit and the other tail goes to a 100a single unit that feeds my garage. </p><p>The garage is fed by a 10mm cable into my garage consumer unit. </p><p>Inside the garage cu I have the main switch with 2 16a MCB for the AC side of the solar PV. (Non protect side) Then 1 100a RCD with my ring main and lighting ect. </p><p>The metre supplied (Acrel acr10r) is wired to live/neutral then the CT is clipped to the live of the 10mm cable from the house. (Arrow pointing to house).</p><p></p><p>Is there anything wrong with my set-up or is there a setting inside the inverter that needs altering?</p></blockquote><p></p>
[QUOTE="Andy1733, post: 526382, member: 34898"] My set-up. Main electric connection (main fuse) enters my house in the kitchen. This goes through the smart metre then the tails split via Henley blocks. One tail goes to my house consumer unit and the other tail goes to a 100a single unit that feeds my garage. The garage is fed by a 10mm cable into my garage consumer unit. Inside the garage cu I have the main switch with 2 16a MCB for the AC side of the solar PV. (Non protect side) Then 1 100a RCD with my ring main and lighting ect. The metre supplied (Acrel acr10r) is wired to live/neutral then the CT is clipped to the live of the 10mm cable from the house. (Arrow pointing to house). Is there anything wrong with my set-up or is there a setting inside the inverter that needs altering? [/QUOTE]
Insert quotes…
Verification
Post reply
Green Renewable Energy Forum
Solar PV Forum
Help with my setup
Top