Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="lee mcgregor" data-source="post: 25127" data-attributes="member: 1599"><p>lads advice would be welcome. i was called out to a job today and on finishing the job the lady ask me to look at the immersion  as they were only ever getting warm water , i took ohms of element which work out correct and check thermostat which was broken (consistently staying on ) now disconnected link from element to neutral to see if same voltage in and out which again both 239 v so that was ok. any other ideas to why the water only ever warm when really should be scalding hot since thermo was constant on???????? water flowing ok to so dont think any blockages? cheersApplaud Smiley</p></blockquote><p></p>