Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Main Forums
Electrician Talk Forum
Must Get A Life!
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Talk Electrician Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="steptoe" data-source="post: 322989" data-attributes="member: 7"><p>yer, it cant syphon higher than the source,</p><p></p><p>at the minute the 'hot' water is merely rising up the cans, then as the water at the bottom gets hotter it rises and the top water falls,</p><p></p><p>what you need is a larger tub of water,[5 gallon drum?], place the inlet[bottom hose near the top, and the outlet [top hose] near the bottom of this barrel,</p><p></p><p>you will need to prime it first, simply suck on the top outlet until water comes out the hose, put your thumb over it, and fix it into the bottom of your barrel,</p><p></p><p>the water will continually syphon round and will gradually heat up as it goes, you may need to use a smaller diameter hose so it doesnt travel too fast, and not gain enough heat through the matrix.</p><p></p><p>looking good BTW,</p><p></p><p> :Applaud</p></blockquote><p></p>
[QUOTE="steptoe, post: 322989, member: 7"] yer, it cant syphon higher than the source, at the minute the 'hot' water is merely rising up the cans, then as the water at the bottom gets hotter it rises and the top water falls, what you need is a larger tub of water,[5 gallon drum?], place the inlet[bottom hose near the top, and the outlet [top hose] near the bottom of this barrel, you will need to prime it first, simply suck on the top outlet until water comes out the hose, put your thumb over it, and fix it into the bottom of your barrel, the water will continually syphon round and will gradually heat up as it goes, you may need to use a smaller diameter hose so it doesnt travel too fast, and not gain enough heat through the matrix. looking good BTW, :Applaud [/QUOTE]
Insert quotes…
Verification
Post reply
Main Forums
Electrician Talk Forum
Must Get A Life!
Top