grumpy old spark
Well-known member
- Joined
- Mar 8, 2008
- Messages
- 61
- Reaction score
- 1
ELLO AGAIN
I noticed that a radial cct on this job had a 4mm out of the board which went to one socket then out in 2.5mm to the 2 remaining sockets on the cct. the walls are all finished so no chance of changing 4mm to 2.5mm
the cct was intended to be a 20a radial and will be protected by a 20a mcb,
do you see any probs with this .
cheers again
Grumpy
I noticed that a radial cct on this job had a 4mm out of the board which went to one socket then out in 2.5mm to the 2 remaining sockets on the cct. the walls are all finished so no chance of changing 4mm to 2.5mm
the cct was intended to be a 20a radial and will be protected by a 20a mcb,
do you see any probs with this .
cheers again
Grumpy