Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="Andy™" data-source="post: 558583" data-attributes="member: 2012">you can pretty much guarantee that the 16m isn't clipped direct and is installed in a method where its capacity is less than 80a...bonding its also done inside at point of entry, so those with it outside arguably doesn't comply (although that's often the only practical point that's going to be accessible), the rest that's not visible from the outside may be done insidewater usually doesn't need bonding if its a plastic supply. same with gas. would need to be tested to see if its extraneous</blockquote>