towel Rail

Help Support Talk Electrician Forum:

danny7299

Well-known member
Joined
Apr 6, 2008
Messages
880
Reaction score
0
Location
Leicestershire
hi There

My old man want me to install a towel Rail in the bathroom, It will be located in Zone 2 and be Fused spured of Ring Main (There for be RCD Protected).

The Fused Spur will be located on the out side of the bathroom.

I am going to check with my boss tomorrow, but does this sound fine?

I though it do? But wanted to check?...

Cheers :p

 

Admin1

Forum Founder
Joined
Feb 6, 2008
Messages
10,278
Reaction score
-1
I don't don't judge people on their grammar, and neither should anyone else on here. There's too much of that on other Electrical Forums, and is a playing factor as to why I started this place up. :)

 

Theorysparky

Domestic Electrician
Joined
Feb 18, 2008
Messages
4,233
Reaction score
0
hi ThereMy old man want me to install a towel Rail in the bathroom, It will be located in Zone 2 and be Fused spured of Ring Main (There for be RCD Protected).

The Fused Spur will be located on the out side of the bathroom.

I am going to check with my boss tomorrow, but does this sound fine?

I though it do? But wanted to check?...

Cheers :p
Sounds good to me,, fused correctly ?

flex outlet plate in bathroom ???

i would label the fcu to indicate what its for as it is on the outside wall

jobs a good un

 
Joined
Mar 28, 2008
Messages
13,619
Reaction score
296
hi ThereMy old man want me to install a towel Rail in the bathroom, It will be located in Zone 2 and be Fused spured of Ring Main (There for be RCD Protected).

The Fused Spur will be located on the out side of the bathroom.

I am going to check with my boss tomorrow, but does this sound fine?

I though it do? But wanted to check?...

Cheers :p
No probs. ;)

If it was easier the FCU could also be in the bathroom if there is sufficient space for it to be outside of zone 2?

e.g. greater than 0.6m (60cm) from the vertical edge of the Bath/shower (zone 1). :D

 

Latest posts

Top