Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Main Forums
Intruder, Fire, CCTV, Emg Light, Access Control
Wiring Help Please Changing a Automatic Alarms Bell Box for Texecom Premier Odyssey 3E
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Talk Electrician Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="IanN" data-source="post: 524412" data-attributes="member: 31338"><p>Looks to me like the black wire is the tamper return so it would go to C</p><p></p><p>red is the 12v positive so it would go to A</p><p>Yellow is hold off neg which would go to D</p><p>blue is the siren trigger (also linked to the strobe input) B to trigger the siren, S to trigger the strobe.</p><p>From the photo it only looks like 4 core cable so you would have to link the siren and strobe triggers but if there is a spare core in your sounder cable I’d wire them separately</p><p></p><p>edit: it’d be worth double checking that the red core is actually the positive! You could either check for 12 volts between red & yellow at the sounder end or look in the panel to make sure the red goes to the bell + terminal. Over the years I’ve seen some installers use red as negative…</p></blockquote><p></p>
[QUOTE="IanN, post: 524412, member: 31338"] Looks to me like the black wire is the tamper return so it would go to C red is the 12v positive so it would go to A Yellow is hold off neg which would go to D blue is the siren trigger (also linked to the strobe input) B to trigger the siren, S to trigger the strobe. From the photo it only looks like 4 core cable so you would have to link the siren and strobe triggers but if there is a spare core in your sounder cable I’d wire them separately edit: it’d be worth double checking that the red core is actually the positive! You could either check for 12 volts between red & yellow at the sounder end or look in the panel to make sure the red goes to the bell + terminal. Over the years I’ve seen some installers use red as negative… [/QUOTE]
Insert quotes…
Verification
Post reply
Main Forums
Intruder, Fire, CCTV, Emg Light, Access Control
Wiring Help Please Changing a Automatic Alarms Bell Box for Texecom Premier Odyssey 3E
Top