Badger

Call DNO and ask them

Take a single socket from supply in board on that circuit next to fuseboard inside the house

https://www.amazon.co.uk/dp/B0D9GKHNV1/ref=sspa_mw_detail_0?ie=UTF8&sp_csd=d2lkZ2V0TmFtZT1zcF9waG9uZV9kZXRhaWwp13NParams&th=1 Found...

Enphase might the better option tbh

😂😂😂😂😂

Arnt they over head lines connectors for the overhead supply cables to tap the transformers on the the uninsulated wires over the poles

Have you checked the fuses between the battery setup and the inverter make sure one of them has not blown as that would stop it charging...

There is no easy way to say this. Both your builder and your kitchen fitter are idiots. There is no way either of them should have...

By the looks of the location of the meter the whole cupboard would need removing out of that section in order to not restrict access for...

If you have enphase micro. Inverters which operate at reduce dc voltage on the array as per solar panel is a Seperate inverter...

Also you can use a dark coloured fleece jacket to civer the photocell

photocell for outside lighting

What's been plugged in the garage after the new supply has been installed

I will. Always run a 6mm cooker feed into the kitchen for oven and a separate 6mm or 10mm feed for a hob even if it is down rated to a...

Would have been better hard wired into a connection plate on the wall I'm not a fan of ovens on plugs tbh better to be hard wired like...