UNG

With the poor quality of a lot of EICR's the next inspection date and reason for it is but a very minor issue in the grand scheme

They are not quango's in the true sense as they to my knowledge do not receive any government funding although they do act like they are...

Not familiar with this kit myself but found a product data sheet online which reading through it there is some limited troubleshooting...

But it never put them all off which was what was intended a lot of builders I knew back then carried on as never was and then you had...

They didn't try to change the industry they did their very best to destroy it and they are now reaping what they sowed with a lack of...

Missing a blank on the left.

I don't suppose the electrician is the same one who has his sticker on the CU?

Reality is that google cannot search every product listing on every potential suppliers product catalogue.. And even when it is able to...

This reminds me of a job coming up to christmas many years ago we sent an electrician to an RCD tripping fault house was on mural wired...

Agreed. Many years ago some cooker manufactures instructions used to state do not connect this item via an RCD.. Which I understood to...

I think there are plenty of people in some slightly lighter corners of the trade doing it as well The big problem is we have trade scams...

If you have an MFT to hand you could do some tests to prove it is ok

So the spec for that cooker says 35amp and to trip a 40A breaker you would at least 60 - 70A as a minimum and it would probably take a...

Can you post a picture of the load info plate normally found of the back of cooker or sometimes in the jamb of the oven door

Seems to me : Some Landlords feel they might need a certificate but if so it's more as an alternative to complete or up to date...