Hi guys, I just bled the radiators in my rented house and now the biasi Riva compact boiler has lost HW pressure, I've done some online research and can see a few answers but I would rather check with a pro before getting my landlord involved, I've attached images of the setup, what do I need to do?
This is what texecom said;
"This would not be the engineer code locked but most likely the codes have become crossed over or mixed up at some stage. Locking the engineer code is a deliberate action in engineer programming options.
We suggest defaulting the alarm panel back to factory settings...
So I'm assuming a "user" can access functions such as walkthrough etc and only "engineers" can access functions such as zone suites etc? If so that might indicate the panels locked because I just tried "configuring the keypad" like it advises in the instruction manual it came with which is...
Hmm, I tried resetting the factory settings by following code-prog-07 but when I dial in 07 it just chimes like it's an error, can I just reset it all and start again?
Update* all I can do with the panel is set and unset it, if I enter my user access code which I changed from 4321 to 1234 and press programming, it won't allow me to do anything, for example edit zones in part set suite 1
Hi chaps, today I fitted a new keypad to my veritas r8 system, I'm assuming because the main panel battery and mains was turned off for 24 hours the system has reset to factory.
The code to set the alarm has reverted to 4321 and I'm having an issue changing the set code. I've followed the...