Recent content by spike47

Talk Electrician Forum

Help Support Talk Electrician Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. spike47

    Adding another circuit !

    Have a 63A RCD 5 Way box, with a 45A MCB, feds by 16mm2 tails, this in then feeding into a isolator via 10mm2 T&E, that then supplies the feed to a 6.5KW heater that is used prob once a month for 10 min intervals max. Question: I have a spare 63A RCB + 20A MCB box, Can I take another feed from...
  2. spike47

    Switching off Light affecting TV signal !

    Hi No they are 20w halogen spot bulbs
  3. spike47

    Switching off Light affecting TV signal !

    Hi Strange thing happening with next door Neighbours TV , when they switch off their Kitchen ELV (12v) down lighters x6 the TV screen goes blank for a second then comes back on , it is if the signal goes ( Sky Box ) then comes back on , the TV itself stays on . I just do not have any idea of...
  4. spike47

    Cat 6 cable no signal

    Hi Thanks for your reply , you will have to excuse my ignorant's on this subject , but will this switch be outside the house ! .
  5. spike47

    Cat 6 cable no signal

    Just another quicky here while we are on cctv , I have 2 more Camera's to put up , can they be all linked to one cable somehow or do I have to do a separate cable through the house wall to my Router for each Camera  ! . cheers Spike
  6. spike47

    Cat 6 cable no signal

    Yes it has its own power supply . cheers Spike
  7. spike47

    Cat 6 cable no signal

    Hi Guys  Would you Adam n Eve it  , left it connected overnight came to check this morning and Whalla we have lift of , can get pics from Phone n PC , so it seems that  ProDave had the answer , I was more or less 100% sure I had it connected ok and the cable was ok !  . So there you have it ...
  8. spike47

    Cat 6 cable no signal

    Yes , that sounds a good idea , will it talk to the Camera ! .
  9. spike47

    Cat 6 cable no signal

    Yes as I mentioned first , I connected my laptop , but the Laptop just kept searching for a connection ( orange light ) it goes green when it has a connection to the router . I have ordered a Tester now so will see what that comes up with , will come back on here in a couple of days to say what...
  10. spike47

    Cat 6 cable no signal

    Yes I understood cat 6 was good for 100m , so I am well withing that range ,Pro Dave may have something there about the Router configuring itself for that length of cable . Maybe I should just leave it connected overnight and see what it is like in the morning , I am nearly 100% ( nearly ) sure...
  11. spike47

    Cat 6 cable no signal

    Rob. , Just ordered one , yes it has a ip address , it can be pinged when it is in range of the house wi-fi , but not as far as the garage , that is why I have put in a cable . cheers Spike
  12. spike47

    Cat 6 cable no signal

    No ! , but will . tks
  13. spike47

    Cat 6 cable no signal

    Yes I have done that , that is how I shorted the pairs , a short lengh of cable with a crimp on , connected into the socket at one end ,  then twisted the pairs together , done a continuity test at the other  end socket .
  14. spike47

    Cat 6 cable no signal

    Have tested direct from the back of each socket at the connector to the wire ! .
  15. spike47

    Cat 6 cable no signal

    Andy™ , Yes could of put them the wrong way round ,but not crossed otherwise I would not of got a circuit shorting each pair at one end . each ethernet socket connector is colour coded , so pretty easy to follow at both ends . cheers Spike
Top