Search results

Hi there I am going to look at a job this week in a recording studio where they say the lighting is interfering with the audio equipment. I was wondering if anyone has done any work in a similar place and has any advice on what fittings/lamps should be used. Many thanks in advance

Finally got round to testing before I change the CU, the Ze is fine, 0.56 ohm, so on to the next job!! Cheers for all input

Thanks everyone Should've been clearer, was just enquiring if the earth wire was ok really.

hi there Was just wondering what your opinion of this is. Does this intake need updating by the local DNO? It looks to me that it is out of date by some way. Could i expect the DNO to come out and update it at their cost? ps hope the pic uploaded, first one I've done. many thanks

That's just what we need Helpful Comments, cheers

Think I'll send it outside then back in to the gas meter.

Thanks for responses. I Seem to have taken the 600mm literally. Looks like I'll be doing some drilling and lifting, happy days. Cheers again

Hi there I have a TN-S system with an ancient re-wireable fuse box that needs changing. It is situated at the very front of the house. My gas service pipe is under the stairs approx 4 meters away and the water service pipe is in the kitchen on the other side of the house. I cannot connect earth...

thanks for that everyone!! :^O

Hi I'm installing a new cu and the earthing needs upgrading to 17th ed. It is TN-S and around the oncoming supply where the sheath is there is a braided wire connected to the earthing block. 17th says that the oncoming needs to be 16mm so how do I replace the weird braided wire? Is there a new...

Thanks for the advice!! Guinness

Thanks for the advice, helps alot. Just one more question. When you say use an earth nut, where does the cpc from the 3 core connect to if you don't use a banjo. Does it connect to the grub screw on the nut and then from the same grub screw to the MET? Do you have any close up pictures of the...

Hi there Am a student lecky and was wondering did you wire the swa straight to the MCB with no connector block in an adaptable box?. And just checking, I'm using 4mm swa and I need to connect to a 32A mcb?