Search results

Yeah i know but i vaguely remember reading in the instructions when i had it, that they have a combination to unlock them in case you ever forgot your numbers. sort of like a master unlocking combination.

Hi All, does anyone know if the Kewtech kewloc all have the same unlocking number combination, if so what is it. I've missed placed the instructions for mine and its doing my nutt in trying to remember it. I've never used it before.

Hi All, Does anyone know where i can take a decent value for money cctv installation course in or around Leeds West Yorkshire?

The cable i used is 1.5mm T & E heat resistant flex

I've put quite a few security lights up and never had this problem. Its normally straight forward, L-L, N-N and E-E.

I've already tried that twice. I've even took one back to the wholesalers and replaced it with another, thinking it was a faulty light.

Hi All, I've just installed an Elro 120 watt Halogen outdoor security light with PIR for a mate and it stays on constantly, even when i adjust the timer and daylight settings underneath the PIR sensor. I spurred off a bedroom socket and mounted a 5A FCU. Can anybody offer any help as to why its...

Good evening all, Can a competent person who is not affiliated to any scan schemes issue a EICR?

16mm from my earth block (MET) to the CU. Two 10mm from my earth block bypassing CU, and going straight to water and gas pipes. 6mm coming from the side of the cut-out (soz for the confusion chaps) to my earth block temperarily until I know how to terminate my 16mm ( replace 6mm for 16mm) hope...

Theres currently a 6mm earthing conductor coming from the MET at the head of the TN-C-S. I've upgraded the main earth in the CU to 16mm and both bonding conductors to 10mm. Therefore i would have to upgrade the earth conductor at the head of the TN-C-S to 16mm too. Correct me if i'm wrong. Thanks.

TN-C-S

Good evening all, I've just done a CU change in my own home. Everything went well until i realise i wouldnt be able to terminate my 16mm main earth into the side of the supply cable's bullet fuse which currently has a 6mm earth in it. The holes on the earth block are too small to get 16's in...

Thanks for the positive feedback guys, I 'll bond as near as reasonably practicable.

No the water is fed from a copper pipe.

I am not sure whether there is any bonding to the pipe behind the wall but the other two water pipes have been cross bonded with 4mm. The nearest place i could put new 10mm would be on either of the two water pipes to the left of the stop cock. I can't see what else to do.

TN-C-S.

Good evening all, Can anyone offer any advice as to how i should tackle this slight problem i have. I have to upgrade my main protective bonding conductor to my water pipe (to 10mm), as i will be doing a CU change in the next few days. My current bonding is 6mm and the meter tails are 16mm to my...

Thank you guys.

Hi There, I'm going to do a consumer unit change in my own home and add an additional circuit for my assessment by Elecsa. My current CU is an old Wylex metal clad recessed board and its mounted at 1.5 metres from FFL. The circuit cables are terminated from the top of the CU, as the bottom...

Hello there guys n girls, can anyone offer any help with what i've come across this evening. My mate asked me to take a look at his lights,as they trip both his protectice devices. He has two separate lighting circuits in his CU (domestic) both are protected by RCBO's. I've narrowed the faulty...