Search results

Hes moved the two 6 amps to the left, but took the inverter sticker and stuck it over the light sticker. I do know he cut the busbar.

That is b4 he came round, I thought you just wanted to see what board I had. Here it is now

I know the board does have 3 neutral bars

Here it is

I have had the spark round again today, to fit rcbo, after he had gone I looked and its a type ac, so no dc protection again, I'm fuming

Yes it is covered by stickers and there is about 3 inches of din rail available.

On his web page it says he is an accredited solar and battery installer and napit approved. I know you need dc protection, he definitely should.

There is a spare way to the left of the main switch and 3 neutral bars, so could have put an rcbo in.

Yes here it is

Hi, I've just had an electrician round to wire my inverter to the consumer unit. I noticed when I got the invoice, nothing was added to the cu for dc protection, when I turned the inverter on the flow was going back to the grid when charging the batteries, I realised he had put the ct clamp the...

Ok thank you for your help @binky

Max output is 17.3a

Hi, looking at the battery specs max discharge is 89a @ 60 secs, I have 2 batteries 3.5kw each, max output 1.8kw per battery

Hi, is this rcbo ok to use with solis 3.6k hybrid inverter and pylontech batteries, or does it have to be a type B

Thanks Binky, I will leave it to the sparky, just thought I could purchase any hardware that was required.

Hi, I have installed my solis hybrid inverter, connected to the batteries, fed the mains cable to the consumer unit, I will be getting a sparky to wire this in. My question is can this be wired straight to the CU, there is a spare 32 amp fuse, or does it require anything else, like my ev charger...

I bought my pylontech batteries from its technologies, no problems at all

Hi, yes its a good idea, hope all goes well for you

Yes this is my intention @binky