200Mm Towel Rails

[steptoe]

right, back to my bathroom again,

and the wife has decided she wants a towel rail in a place that Im findinding issues to even get tiled.!

I have a gap of about 300mm max, so Im thinking 200mm towel rail,

please dont link me to that 1000£ bow shaped one!

I know its gonna be more than the normal 50£ max I like to pay, the mrs is deffo paying this one!!!!!!!

£100 is the best Ive seen yet, not too fussy, I would prefer chrome, but white will be fine if the numbers are right.

 

[OnOff]

Wow, 200mm, that's very narrow. At that sort of width you normally have vertical elements................but plenty of 300mm wide ones a about sum £100. I just Googled "towel radiator x300mm".

http://www.google.co...iw=1280&bih=863

A couple of sub £100 300mm wide ones here: http://www.smrbathro...Towel-Rail.html

What about a 200mm dia spiral one, might let u get nearer the wall where you want the narrowness and "only" £99,

http://www.bestheati...mm-x-200mm.html

Or learn to TIG weld and make your own, designed to fit the space..................or get a bunch of chrome push fit fittings and make yer own!

 

[Steve3948]

Can you get a towel on 200mm width !!!! :yellow card

 

[OnOff]

Can you get a towel on 200mm width !!!! :yellow card

Believe it's called "a flannel"

 

[steptoe]

Yer onoff, I found that spiral one too, looks like that is what its going to be,

I deffo cant fit a 300 in the gap!

 

[OnOff]

Yer onoff, I found that spiral one too, looks like that is what its going to be,

I deffo cant fit a 300 in the gap!

Corner one?

http://www.designer-...el-warmers.html

This one's nice IMO and VERY slim, pricey I bet:

http://www.kudox.com/Products/Designer_Towel_Warmers/5060235344862_HeatBar_Twin_Hyd/5060235344862_heatbar_twin_hydronic_towel_warmer_250mm_x_1800mm_.html

 

[Sharpend]

Yer onoff, I found that spiral one too, looks like that is what its going to be,

I deffo cant fit a 300 in the gap!

Not this one http://www.bestheating.com/chrome-small-coil-10-ring-heated-towel-rail-540mm-x-200mm.html

it's out of stock!!!

 

[Sharpend]

Don't know what you're struggling with, what's wrong with this.

http://item.mobileweb.ebay.co.uk/viewitem?itemId=180950446943

 

[Steve3948]

Don't know what you're struggling with, what's wrong with this.

http://item.mobilewe...Id=180950446943

That's a toilet roll holder, hahaha :slap is it 15mm feed with concealed valves

 

[Sharpend]

Sorry have I misunderstood? Didn't see anything about heated!!

 

[steptoe]

well the way I plumb it probably wont be,

anyway, I just flush the toilet, its plumbed into the hot anyway.

 

[OnOff]

Can't you just get bit flash with a length of 20mm galv and a Hilmor? However it turns out tell her it's "designer"!

 

[steptoe]

bit like the clothes rail I made her.!!!!!

funnily enough, if I get really stuck I'll get my mate to solder one up out of copper and get it dipped or powder coated, thats the last resort though.

 

[OnOff]

bit like the clothes rail I made her.!!!!!

funnily enough, if I get really stuck I'll get my mate to solder one up out of copper and get it dipped or powder coated, thats the last resort though.

It's a curtain rail in my house! You could use chromed copper pipe and chromed push fit tees and elbows - they're almost as slim as Yorkshires..........but the cost would be astronomic!

http://www.homeofchrome.co.uk/inc/searchresults?s=22mm%20pushfit%20chromed&ss=22mm%20pushfit%20chromed&n=873450

 

[M107]

how about 185mm towel warmer.................electrikery one though.

http://www.kudox.com/Products/Electric_Towel_Warmers/5060235344855_HeatBar_Single_E/5060235344855_heatbar_single_electric_towel_warmer_185mm_x_1800m.html

 

[Steve3948]

how about 185mm towel warmer.................electrikery one though.

http://www.kudox.com...mm_x_1800m.html

Who did'nt read post 6 then. :red card

 

[M107]

:coat