Chint dsu 666

[wazzer]

Advice please on wiring this particular meter up
Correct me if i am wrong Single phase connection
live from grid to connection 1 and Neutral to 2
Outgoing Live to no 3 and Neutral to no 4 on Meter
I have wired up communication cable from inverter
Clamp arrow should be facing to grid direction on live
Regards

 

[binky]

Be careful, it's not neutral live in in one side and out the other https://images.app.goo.gl/uoKCxnX56ztKkNVS9

 

[wazzer]

Hello Mate
Their instructions are vague
the Meter came with the inverter
Regards

 

[binky]

not the one I was thinking of and typical Chinese ***** instructions. So meter needs L N power supply to,operate, for that you should install a 6A MCB in the CU, run a new cct in 1mm FTE. The CT clamp is clear enough, the RJ45 only uses the centre pins, ignore the 'CT on pins 1 and 8'.