Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Main Forums
WhiteGoods & Appliances Forum
Diplomat Hob
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Talk Electrician Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="hectorthetester" data-source="post: 304119" data-attributes="member: 2083"><p>I was looking at a fault with a Diplomat APL 1304 for a family relative.Problem is appliance is tripping mcb at consumer unit when a specific ring is switched on.Any way i dismantled the appliance to visually examine the hob ring and found no apparent visual damage ie broken/damaged element.I disconnected the wires from the stat to the ring and re energised the supply.When i turned on the control knob to the maximum position at the first attempt it immediately tripped the mcb (i then thought the control stat/switch was the culprit).However i re energised the appliance again and again set the control knob to the maximum position-this time the mcb did not disconnect.My suspicion is on the hob ring?</p><p></p><p>Any suggestions much appreciated.</p></blockquote><p></p>
[QUOTE="hectorthetester, post: 304119, member: 2083"] I was looking at a fault with a Diplomat APL 1304 for a family relative.Problem is appliance is tripping mcb at consumer unit when a specific ring is switched on.Any way i dismantled the appliance to visually examine the hob ring and found no apparent visual damage ie broken/damaged element.I disconnected the wires from the stat to the ring and re energised the supply.When i turned on the control knob to the maximum position at the first attempt it immediately tripped the mcb (i then thought the control stat/switch was the culprit).However i re energised the appliance again and again set the control knob to the maximum position-this time the mcb did not disconnect.My suspicion is on the hob ring? Any suggestions much appreciated. [/QUOTE]
Insert quotes…
Verification
Post reply
Main Forums
WhiteGoods & Appliances Forum
Diplomat Hob
Top