DVR to Loftbox

[PaulSC]

Afternoon all,

Quick question. I have a National Electronics DVR with a BNC (I guess 1v pp 75 ohm) monitor output. Can anyone reccomend a suitable loftbox that will distribute TV (to 8 points) but also accept an input from this DVR to distribute CCTV as well?

I think I recall Labgear doing one but they were quite pricey.

Thanks

Paul

 

[SLIPSHOD & SLAPDASH]

Maplins ? You will need a modulator to convert the signal before the loft amp

Edit , check with someone else before you listen to me

 

[Badger]

shoddy is correct you need to go from dvr output to modulator then to input of dist amp then outputs of amp will be sent a signal to the tv, tune each tv into the relevant signal frequency and youll get the pictures from the cctv, word of warning though, make sure that you keep the signal as far away as your antenna channels as if the signal is close in frequency you will! get interference onto the cctv picture.

 

[PaulSC]

Thanks Slips (trust your own instincts ) and Badge,

Anything on TLC or Screwfix you could point me to?

Would the following still need a modulator or is it inbuilt?

Labgear HDU641/S Home Distribution Unit 4-Way - Screwfix.com, Where the Trade Buys

Thanks chaps

Paul

 

[Badger]

hi paul that would be fine to take hold of the modulated signal from the cctv but! youll still need a modulator

---------- Post Auto-Merged at 20:20 ---------- Previous post was made at 20:18 ----------

Brand New Indoor RF Audio Video CCTV Scart TV Modulator on eBay (end time 14-Feb-11 20:26:32 GMT)

modulator ; )