Murdoch

Thanks for the feedback - we appreciate it.

Alrighty, I'll be trying to see if I can find an electrician through someone I know and report back here whenever that happens...

Check a trade ratings are NOT to trusted

When you say "old ish" - can you post a photo? Also beware that the new breakers will be more sensitive

Update the whole box and use one with RCBO's and SPD

I would suggest that 30-40 minutes is insufficient time to do an accurate EICR... Also having an apprentice would be more likely to...

Humidity sensors don’t detect smells

I must admit if the circuit only serves one point and its one with an RCD in, I will write the results in the RCD times box for that...

30 - 40 minutes to do an EICR - probably isn't worth the paper its written on I would ask for a refund and find a spark to do it...

Dare i ask you how much you paid for the EICR ? and how long was the spark in the house ?

That’s a poor report with no use of C3’s Lots of those C2’s are C3’s The the incoming arrangement isn’t confirmed with no Ze ….

The unused cable gland at the top left of the CU confirms this

But a cable will be needed back to the CU - best avoid joints is my advice

Dedicated circuit, dedicated RCD

Just as an observation I am getting email updates about this thread , and a couple of others - wonder why?