Help regarding immersion wiring

[mickosh]

Hello,
I have just replaced a dual immersion (sink/bath) switch with a wifi controller, its a lanbon l8 wifi immersion switch, I have it wired up and its working as it should my only concern is that the controller i purchased does not have a neutral in and out so i had to double them up, so I have a constant unswitched neutral going to the thermal cut out switch of the immersion, is this a cause for concern? Thanks in advance

 

[ProDave]

No, the neutral was never switched in these A/B switches.

 

[ProDave]

I would add, what I did not like about these dual immersions with a "bath / sink" switch is the switch did switch the L to either of the 2 different heating elements, but because the thermostat was only ever single pole, the thermostat was in the common neutral connection. But that is the way they came configured and the only way I ever saw them connected.