Theorysparky
Domestic Electrician
- Joined
- Feb 18, 2008
- Messages
- 4,232
- Reaction score
- 0
Problem i have is that when the hot water is on i don't get 240v at the room stat when i select heating (only 90v)
if i select heating first then hot water it has 240v and both work
this will only work when the programmer is set to 'allday' on both
if it is set for 'Auto' it does what it wants
when they are on individually the wiring tests out ok
when they are both on its the same
any ideas ???
i thought it maybe the programmer,,, i should have linked it out across the terminals and this would have confirmed it
Cheers Mark
if i select heating first then hot water it has 240v and both work
this will only work when the programmer is set to 'allday' on both
if it is set for 'Auto' it does what it wants
when they are on individually the wiring tests out ok
when they are both on its the same
any ideas ???
i thought it maybe the programmer,,, i should have linked it out across the terminals and this would have confirmed it
Cheers Mark