Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Main Forums
Do-It-Yourself (DIY) Question & Answer Forum
Passive infra red sensor
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Talk Electrician Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Flying Scotsman" data-source="post: 14270" data-attributes="member: 20"><p>From supply in LNE go to PIR (Perm Live which is normally brown wire no, Neutral, and Earth, from PIR on switched live output to each fitting (lamps) Then from Pir to override switch in twin brown, To make it easier take the 2 x twin and earths and twin brown to a JB and take a 3 core to the pir to make connections easier.</p><p></p><p>hope that helps.</p><p></p><p><a href="http://www.tlc-direct.co.uk/Technical/DataSheets/Superswitch/6016.pdf" target="_blank">http://www.tlc-direct.co.uk/Technical/DataSheets/Superswitch/6016.pdf</a></p><p></p><p>check this data sheet out and look at the wiring diagram opposite figure 15</p><p></p><p>hope thats of use.</p><p></p><p>flying scotsman</p></blockquote><p></p>
[QUOTE="Flying Scotsman, post: 14270, member: 20"] From supply in LNE go to PIR (Perm Live which is normally brown wire no, Neutral, and Earth, from PIR on switched live output to each fitting (lamps) Then from Pir to override switch in twin brown, To make it easier take the 2 x twin and earths and twin brown to a JB and take a 3 core to the pir to make connections easier. hope that helps. [URL="http://www.tlc-direct.co.uk/Technical/DataSheets/Superswitch/6016.pdf"]http://www.tlc-direct.co.uk/Technical/DataSheets/Superswitch/6016.pdf[/URL] check this data sheet out and look at the wiring diagram opposite figure 15 hope thats of use. flying scotsman [/QUOTE]
Insert quotes…
Verification
Post reply
Main Forums
Do-It-Yourself (DIY) Question & Answer Forum
Passive infra red sensor
Top