that thing inbetween the meter and cu

[paul b b]

hi chaps

sorry i cant think what they are called, isolator thingemebob

 

[Andy™]

isolator?

meter tails?

 

[paul b b]

so you dont need to cut the seals to replace the cu

 

[androiduk2002]

hi chapssorry i cant think what they are called, isolator thingemebob

ROTFWLROTFWLROTFWL

Me thinks Pauls been at KMEs Guinness Guinness Guinness Guinness

ROTFWLROTFWLROTFWL

 

[Andy™]

so you dont need to cut the seals to replace the cu

the problem is there isnt usually anything between meter & CU, other than the tails!

 

[Badger]

EARTH CABLE :^O

 

[Andy™]

EARTH CABLE :^O

i hope its not from a TNCS supply

Sorry, PME

 

[paul b b]

ROTFWLROTFWLROTFWLMe thinks Pauls been at KMEs Guinness Guinness Guinness Guinness

ROTFWLROTFWLROTFWL

its late and im tired lol long day and have to get the house hooverd and spare bed made up for the inlaws to stay:_|

 

[Voltimax]

Disconnector

 

[paul b b]

sorry andy, explaning badly here,

its an isolator, tails go from meter in to the said thing and to the cu, i cant think what the damm thing is called

 

[batty]

Sometimes henley block?

 

[Andy™]

its usually a standard 100A isolator in a case....

NEDL use this... wylex part number is REC2 for isolator & case

 

[paul b b]

ahhh is it a kmf switch?

 

[Andy™]

ahhh is it a kmf switch?

IIRC, KMF is a switch fuse. used when tails are longer than 3mtr etc

 

[batty]

Damn you spoilt it now we could have been guessing for hours another 1000 poster.

; \

 

[Voltimax]

No it's a KFC

 

[paul b b]

ahh, ok so if the tails are short and i dont want to cut the seal on the meter it would be better to use a henly

 

[Andy™]

you can cut tails live and wire direct into a henly or an isolator. i would use the isolator - at least you can then turn it off

 

[paul b b]

lucky the seal faries have been in on the main fuse, but not the meter so i can isolate the supply, i just wanted it to look neat

 

[paul b b]

http://www.qvsdirect.com/images/T/80a_fused_main_dp_switch.jpg

this is the ******, though the ones i fitted before had a cover on the top and bottom for the tails to go into