- Joined
- Mar 28, 2008
- Messages
- 14,523
- Reaction score
- 1,204
There have been occasions when people referred to 'other forums'... whatever that means???
However we have now progressed to the point where we can refer to.... 'that other post!']
I'm getting too lazy to scroll though numerous pages to get to 100+ post..
also the thread had drifted slightly so I thought I would start a new one!
Hey Nicky...
are you out there m8?
I just finished my veg' peeling duties that welshy put me on!
finally got a bit of free time..
so pull up a chair..
grab a coffee.. or a beer.. whatever your preference?
Just to continue 'one aspect' of the posts on "that other thread"...
no number crunching. just definitions!
(perhaps KME or some of the others may drop by later as well? you never know?) ?:|
On one of your calc' bits you said regarding Touch voltage that..
However we have now progressed to the point where we can refer to.... 'that other post!']
I'm getting too lazy to scroll though numerous pages to get to 100+ post..
also the thread had drifted slightly so I thought I would start a new one!
Hey Nicky...
are you out there m8?
I just finished my veg' peeling duties that welshy put me on!
finally got a bit of free time..
so pull up a chair..
grab a coffee.. or a beer.. whatever your preference?
Just to continue 'one aspect' of the posts on "that other thread"...
no number crunching. just definitions!
(perhaps KME or some of the others may drop by later as well? you never know?) ?:|
On one of your calc' bits you said regarding Touch voltage that..
"the 161.48 volts is not the touch voltage. The touch voltage is the voltage from the fault to the met. When the met is at 161volts this means that all other bonded metalwork is also at 161volts to make the faraday cage.
The touch voltage in this case will be just the voltage created along the ccts cpc wire