Hi, my new kitchen will have all new appliances, but i'm wanting to avoid having too many switches above the counter-tops. I know some people have them inside cupboards, but i'm not too keen on this idea, and i guess i'll have to have some (cooker and hob, definately), but what is the best way to limit the number of switches on show ?.....e.g., could i have a single fcu switching two outlets for seperate fridge & freezer (one socket each ?). I doubt you cannot use a double socket; is that correct. Oh and before i'm told 'you're not qualified', yes i know that, but i want to do as much of the chasing out before the electrician arrives, just trying to save money. Much appreciated to anyone offering their expertise.
Under Counter Separate Fridge & Freezer
- Thread starter geetee
- Start date
Help Support Talk Electrician Forum:
no reason you cant have one SFS operating a double socket, or 2 singles, as long as you allow for loading.
Sharpend
"It Just Is"
Speak to your electrician as he will see the new plan in front of him and can best advise on what why where and how? We can give you the technical yes no answer but we don't see what your electrician sees.
Lollypop 
- Joined
- Feb 5, 2009
- Messages
- 5,612
- Reaction score
- 1
What about putting the socket in the cupboard next door and don't bother with sfcu
Sharpend
"It Just Is"
Just for you Sharpie...
Lollypop circuit , appliances fed from a single point with grid switches... would probably mean more chasing but less switches.
Last edited by a moderator:
Doc Hudson
Well-known member
- Joined
- Oct 21, 2008
- Messages
- 5,619
- Reaction score
- 230
Have you considered a grid switch with say 3 or 4 switches in a double gang width back box.
Doc H.
- Joined
- Dec 25, 2011
- Messages
- 5,470
- Reaction score
- 80
Our sponsors do grid switches don't forget:
http://www.ukelectricalsupplies.com/search.htm?search=grid
Place the grid in a place where you can easily get to it though if possible or it rather defeats the object. And go for a known make/range where you can get all the switches pre-engraved. You can limit the amount of chasing by trunking below the worktops etc. You still though want to make sure that all your socket outlets that are out of sight are accessible for future maintenance.
http://www.ukelectricalsupplies.com/search.htm?search=grid
Place the grid in a place where you can easily get to it though if possible or it rather defeats the object. And go for a known make/range where you can get all the switches pre-engraved. You can limit the amount of chasing by trunking below the worktops etc. You still though want to make sure that all your socket outlets that are out of sight are accessible for future maintenance.
- Joined
- Feb 27, 2008
- Messages
- 11,018
- Reaction score
- 0
Very good slips hope you are not showing your age though.
Similar threads
