what ever next

[matt.leung]

Connect Bus Tabbing Wire - Electrical Conductive Glue Soldering Solder iron gun | eBay

 

[ProDave]

You can tell those sort of things are a scam.

The description just goes on

and on

and on

and on

and .... you get the idea.

 

[steptoe]

did you notice it was made in the good 'ole us of a too,

 

[sprocketflup]

as featured on JML....... or wasit K-tel?

 

[a1]

This stuff will not stick to rubber keypads!

Cable doesn't work neither Instructions(broken link)Seller don't want to help

Did not work, a weaker one from Radio Shack worked better!!!

It's not conductive enough. About 200 ohms.

YOU WILL NOT APPLY QUALITY PAINT IS NOT CONDUCTIVE

---------- Post Auto-Merged at 12:28 ---------- Previous post was made at 12:22 ----------

Product didn't work at all. Solder wire was not staying attached to the board.

it was ok but u get what u pay for...

cure time not given. 24 hrs abd clamping required for glue to work.

you get what you pay for, gun is very cheap!

And they are suprised?

 

[SLIPSHOD & SLAPDASH]

A good few years ago (more than 15 !!!) you could buy conductive paint designed for repairing circuit boards and car heater rear windows. I still have a half used jar and it worked very well. I think it contained silver.

Just found this, Repair your heated windscreen with Electro Connector - 3g [GC-0375] -

 

[steptoe]

I have a little tin of that paint somewhere, from way back in my youth,

Hornby sold it for programming zero1 modules!