Recent content by Andeh1

Thanks for the posts, I swapped grey and black round and it's working fine now! Appreciate the support, reminds me why I avoid electrics as much as I possibly can!!!

Thanks poni, II replaced the dial thermostat and confirmed that I havnt damaged anything, and it still works and activates the heating! Heatmiser stat looks to be OK, I'll try and reverse the grey and black. I thought grey is neutral and black switched live though?

We have a Heatmiser zoned UFH throughout our new build property, and then a couple of radiators in the attached garage (for possible conversion should we require it). Builder's electrician installed a dial/rotary thermostat (Honeywell T6360B 1036) but I would like to change this stat to a...

Thank you very much again john! There are 2 x 3 core going to the timer install location (next to fuse box), which I am lead to believe connect back to the switches which currently control the lights... but he is being so obtuse over it all I can't get my head around it.... The chapter & verse...

Thank you so much John!!...so just so i can layman's explain it to my builder, the T with the circle in it in line with the L & N.... can you provide me an idiots guide to that? That's to power the timer to keep it 'permanent live'.....then the timer when 'on' powers the in line timer switch...

Sorry John, my electrician is claiming the previous diagram you kindly shared doesn't make sense to him '' & his mate agreed ''. He is using this with my builder (contracted) to complicate/avoid the timer installation..... for reasons I have no idea of! Builder has repeatedly shown himself to...

Electrician continues to question things, but for my idiots proof response to him, I presume the below would work fine? :( :( PIR can be turned on/off via switch to enable/disable it controlling lights Timer can be turned on/off via switch to enable/disable it controlling lights If both are...

Thank you for the continued help...I have made it complex, but when it is your 'forever home' (a new build) I have thought long & hard about how things can work to cover as many eventualities as possible. It is indeed having the timer and switch/PIR working independent of each other. So the...

Thank you VERY much all, and John for sketching it out. I have forwarded your drawing to him, I now await his response! I will update this post accordingly.... :)

It's an either or type turn on for the lights. Ie.... Timer is set and turns lights on every morning for an hour and ever evening. And/or if the switch is 'on', and we drive back home middle of the night, then PIR turns lights on for us. Seperate to this, if the switch is 'off'.... 1)...

Morning all, sorry to post again but electrician is due back tomorrow and I'd like to suggest to him a resolution from the help you guys have given! Just as per above, could John's drawing work for the timer to override the switch/PIR setup that is installed & working currently? We have a 3...

Thank you all, Electrician is a good guy but its a very complicated 4 way switch controlling 3 lots of external lighting which all have PIR's as well all contained in the back box....how he can make sense of it I don't know!! Ideally I would like the timer to over ride the switch if possible...

Thank you very much Poni, I will look into this!

Hi, We have some outside lights which are successful controlled via 2 x PIR sensors. One that covers you as you step outside the front door and one around the other side of the house where you drive into the driveway. We also have a switch by the front door for us to turn the PIRs 'on' (they...

Thanks poni, I presume because we have 2 x switches then the PIR, ideal being one is a time lagged switch (what I'm looking for) wired into a normal switch ("manual On") then the PIR. Just a time lag switch away from my vision of it working perfectly! Until then... Garage lights left on from...