stuboy

The inverter and your other circuits are all connected to one side of the RCD. So, for example, you are mowing the lawn and run over the...

(1) Good question.. (2) Good to see that you can put forward a valid reason for your understanding. (rather than some lazy bods who...

Yep have had exactly that happen!

It's not uncommon to have an RCD trip when cutting cable on a properly isolated circuit on a split load board from N-E bridging. If...

The greatest possibility of a broken connection is behind an accessory. Look in the kitchen to find where the extension has been spurred...

Looking at that earth rod it needs a good clean and a proper termination made with some Penetrox and a wrap of Denso tape to keep the...

Just to add for reference, I've used Wylex type A RCBO's and never had any problems..... yet, mainly because my OCD likes a nice row of...

my experience they take no notice what so ever. As the installer you are suppossed to get a civil engineer to assess the weight bearing...

Did mine last week, it's challenging but necessarily so. There are lots of mock papers out there and a couple of helpful YouTube bits to...

Having read the above I agree. There will be some newbies ( you know the sort, YouTube channel, 75 zillion followers, drive the van...

Its always the hidden MC4 connector shuved in with no due care and attention that causes the trouble, even a quick tie wrap to keep them...

Hi, I am pretty sure that group used to try and recruit self employed registered sparks to deal with their callouts ect , they provide...

My view is, that if you have lightning and a nice earthed array, mr lighning bolt will go, oooh look a nice path to earth lets give it...

Has the RCBO been tested to confirm it is operating correctly? I would probably look for an equivalent rating of RCBO already in you CU...

Yet another truly sad situation . Condolences to those left to live with this tragic passing of life. Had a situation recently where a...