Air Line fittings

[Apache]

Any one good at identifying these? I need the one on the red hose. The connector on the green device is a Euro 1/4" for comparison.

Thanks

 

[Andy™]

euro quick connect. other loks like what you get from lidl / aldi

PCL are far better imo

 

[Apache]

Yes the green one is an air riviter from Aldi.

So the other will be 1/4" euro? That's grand.

(all my air tools are on PCL, but since buying some electric impact wrenches I don't use air much)

 

[roys]

The bigger ones that usually fitted to the Aldi tools are The Xf fittings, believe it stands for extra flow, the slightly smaller ones are the standard range.

I made up a set of male female adaptors going from xf to standard and standard to xf so I didn’t have to worry what end was on the tool, as I have a mixture.

All parts from SCrew fix and about 10 mins to make. I can take a pic and give you the SF numbers if you want?

I only use the PCL as I have had nothing but bother with cheaper ones and the additional cost is minimal.

 

[kerching]

made up a set of male female adaptors going from xf to standard and standard to xf so I didn’t have to worry what end was on the tool, as I have a mixture.

That's exactly what i did

previously I kept changing the male tail,and it was getting silly...all my spares got used and I had a load of lidl,/ Aldi tails

now I can use he aldi/lidl multi port manifold and their flow reducer

simples