andyman 72
Junior Member
- Joined
- Apr 7, 2008
- Messages
- 24
- Reaction score
- 0
hi guys, just a quick question about bonding if you dont mind. if steel trunking is part of the installation then it should be bonded at every section ( is this correct?)
if the trunking is part of the installation should it have a reading of no greater than 0.05 ohms at any point of the installation to the met ?
thankyou for any advice you can give on this matter :Y headbang
if the trunking is part of the installation should it have a reading of no greater than 0.05 ohms at any point of the installation to the met ?
thankyou for any advice you can give on this matter :Y headbang