Contactor to feed CU

[Electroglow]

Hi all...

Do you know of ant regs against fitting a 60A contactor to feed a 4 way cu to supply electric heating.... This would be on a timer to supply the cu?

It will be fused down to 60amp via a fused switch...

Any thoughts??

Thanks

 

[Andy™]

nothing wrong with that

 

[Evans Electric]

+1

Get on with it .

Contactor type AC 21 or AC 22 .

 

[Electroglow]

Thank guys ... The feed to the timer will be supplyed off the main cu... There are 2 supply's one for the power lights ect and one for the heating....

 

[Evans Electric]

Electro, is the heating off peak storage heaters or floor heating ?

 

[Electroglow]

Was floor heating but being changed to electric heater wall mounted about 2kw for each

Need all the heaters to come on at the same time.... When switched by a timer

There is an old radio off peak device fitted but that will not be in use.