Fein Multimaster

[a1]

Quick tip for the Bosch multisaw:-I've saved all my old blades and cut them off where the blade part is welded to the carrier. I have then bought a mitre saw blade - on offer at B and Q at 50p - and cut it up to the same width as the multisaw blade with a grinder, put a couple of slots in each blade to interface with slots put in the carrier and joined together with M4 nuts and bolts and superglue. Result - cheap blades - easily renewed - about the right depth for floorboards.

Top tip there Dave, Would you be so kind as to possibly add some before, during and after pics of this and add it to our "Tips and tricks" forum, please mate?

On the subject of Bosch and Fein Multimasters, I am suprised that our sponsor isswww don't sell them.

 

[kerching]

Second tip..not as good as first but close.

When my blades go blunt I groove them with a skinny stainless steel cutting blade in the angle grinder. Doesn't matter how well you do it, just 4/5 slits. Makes perfect cutter for plaster, plaster board etc. PANTS for wood though!... :coat