Hi Guys,
I have a gala gar 1350 Plasma cutter and am in the process of fixing a generator to operate same. I have a 1970 GM Bedford 410Y 50kva Markon self-regulating alternator; 50/60hz; 3phase but I cannot find any information on the net about this gen. The guy I bought it from told me the AVR board needs to be replaced and it would only be safe to run lights off at present. Does anybody know if this is a big deal or anything about them, reliability, parts etc.
GAR CUT 1350
SUPPLY VOLTAJE U1 230/400 V
EFFECTIVE SUPPLY INTENSITY I1e 57/ 33 A
TYPE OF INPUT GAS. AIR
WORKING PRESSURE 5.5 -6 Bar
RATED INPUT FLOW VOLUME 175 l/min.
ADJUSTMENT POSITIONS I 65 A / 106
II 120 A / 12
DUTY CYCLE I 100%
II 60%
MAXIMUM CUTTING WIDTH 12 -30 mm
THERMAL INSULATION H (180
I have a gala gar 1350 Plasma cutter and am in the process of fixing a generator to operate same. I have a 1970 GM Bedford 410Y 50kva Markon self-regulating alternator; 50/60hz; 3phase but I cannot find any information on the net about this gen. The guy I bought it from told me the AVR board needs to be replaced and it would only be safe to run lights off at present. Does anybody know if this is a big deal or anything about them, reliability, parts etc.
GAR CUT 1350
SUPPLY VOLTAJE U1 230/400 V
EFFECTIVE SUPPLY INTENSITY I1e 57/ 33 A
TYPE OF INPUT GAS. AIR
WORKING PRESSURE 5.5 -6 Bar
RATED INPUT FLOW VOLUME 175 l/min.
ADJUSTMENT POSITIONS I 65 A / 106
II 120 A / 12
DUTY CYCLE I 100%
II 60%
MAXIMUM CUTTING WIDTH 12 -30 mm
THERMAL INSULATION H (180
