I’m currently carrying out a Periodic I&T on an installation that is 2 years old. I’ve done an IR test on a radial lighting circuit with x4 LED’s using combined LN to E method due to hazardous area. The result I’ve received is 15MOhms, is this an acceptable result? New to I&T so have a bit of experience to gain.
LED IR Test Results
- Thread starter Bururu
- Start date
Help Support Talk Electrician Forum:
- Joined
- Mar 28, 2008
- Messages
- 14,509
- Reaction score
- 1,187
What do you think an acceptable value is?
and.. why are you doing a PIR on a 2 year old installation?
You probably need to familiarise yourself with Part 6 BS7671:2018..
Guidance Note 3... And most likely Table 64...
Some may say that lack of comprehensive understanding of such items would suggest that you should not be really be carrying out any Periodic Inspection & Testing without supervision / guidance?
and.. why are you doing a PIR on a 2 year old installation?
You probably need to familiarise yourself with Part 6 BS7671:2018..
Guidance Note 3... And most likely Table 64...
Some may say that lack of comprehensive understanding of such items would suggest that you should not be really be carrying out any Periodic Inspection & Testing without supervision / guidance?
Anything above 1MOhm.
Designer’s recommendation.
Thanks.
Was there with senior colleague but used to seeing new installs with higher readings.
Disconnect the lights and see the IR readings soar
- Joined
- Oct 22, 2010
- Messages
- 14,621
- Reaction score
- 1,169
Hazardous area??
Was that at 500V or 250V? I would not test anything with LEDs at higher than 259v.
250v, thinking it must be the electronics dragging it down…
Yeah
Almost certainly. I mentioned the voltage because some led gear can't take 500v , it's something to be aware of. In fact I hardly ever use 500v these days.
Similar threads
- Locked
Latest posts
-
Recommended brands for LED Floodlights
- Latest: Distorted Vision
-
-
-
-
-
