My own website with photos of projects i'v done.

  • Thread starter חשמלאי-מ
  • Start date
Talk Electrician Forum

Help Support Talk Electrician Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
&

חשמלאי-מ

Guest
hey,my cousin has just finished building our website after 2 month's of work.

you probably won't understand 90% of the writings since it's in hebrew but i'd like

to hear some thoughts about the design and gallery photo taken

חשמלאי שמואל - חשמלאי מוסמך

website address:

my website

gallery address:

http://www.xn----zhcbthntfle9if.co.il/gallery

if i broke any forum rules i'm sorry i haven't seen it anywhere.

 
Last edited:
What language is that in?

Even the page numbers come up backwards!!!!!

As for what we call you "for short", I haven`t a clue :C

I don`t think I can even replicate some of those characters in your username - are you one of "the borg" or something?

 
+1 applaud salute

Your consumer unit is missing blanks

I also wouldn't put a time clock directly next to mcbs I'd use contactor half blanks

 
No issues mixing makes of board and breaker in Tel Aviv then! ;)

Welcome to the forum OP, sorry I can't replicate your user name either due to the Hebrew.

We are a UK based forum. by the way! :Welcome:

 
No issues mixing makes of board and breaker in Tel Aviv then! ;) Welcome to the forum OP, sorry I can't replicate your user name either due to the Hebrew.

We are a UK based forum. by the way! :Welcome:
haha thanks :) just call me guy,i have family in the UK(london..where else?
default_tongue%20in%20cheek.png
)so i think ill get along pretty quickly.

thanks for the comments,do you think i should add more work photos or will it be too much?

 
I could translate it into welsh. (Along with Sidey and The Rev). ]:)

 
Tour consumer unit is missing blanksI also wouldn't put a time clock directly next to mcbs I'd use contactor half blanks
Not to mention that particular contactor is meant for a control panel. It's not designed for a consumer unit. Note the butchering of the front case just to get it to fit, and the exposed terminal screws even when the front is on.

Most of us would regard that as at best an unfinished job.

 
Welcome to the forum,

TBH I have to agree with ProDave about the contactor and missing blanks,,, just plain nasty I'm afraid

Could I ask what country you are aiming your website at? I'm assuming you're not looking at the UK market, however you say that you are in London.

 
No offence mate but a few thoughts ref that panel wiring:

- Bootlace ferrules

- Cable markers

- Slotted trunking - is it a panel or a dis board?

Lovely bit of block paving though.....

 
No offence mate but a few thoughts ref that panel wiring:- Bootlace ferrules

- Cable markers

- Slotted trunking - is it a panel or a dis board?

Lovely bit of block paving though.....
are those parts readily available in the OPs country?

 
Is there any point to a thread on a UK forum looking at a website in a language you can't read......

and at images of work not related to BS7671?

or am I missing something here? :|

:C

 
you want to see how things are done up in that foreign land of Manchester, or the rubbish they get away with in ecosse what with having no partP to keep them in line. ;)

 
its nice to see how things are done in other countries.... we are not limited to 7671... not in terms of showing an interest anyway
Our black museum has a good selection of photos that may as well be from other countries where they pay no regard for BS7671.

Doc H.

---------- Post Auto-Merged at 23:19 ---------- Previous post was made at 23:10 ----------

hey' date='my cousin has just finished building our website after 2 month's of work.you probably won't understand 90% of the writings since it's in hebrew but i'd like

to hear some thoughts about the design and gallery photo taken

חשמלאי שמואל - חשמלאי מוסמך

website address:

my website

gallery address:

http://www.xn----zhcbthntfle9if.co.il/gallery

if i broke any forum rules i'm sorry i haven't seen it anywhere.
Welcome to the forum, I cannot comment on your website as I cannot understand any of the writing. But I will ask what areas of work are you in? From the pictures it appears to be commercial and retail installations? What are the training standards you have to attain to work alone on these sort of jobs? Do you do any work to UK standards?

Doc H.

 
I have translated the homepage for you

We are a team who specialize in the following topics:

Systems planning and operation of new buildings and the like.

Planning and implementing electrical systems villas.

Renovating and upgrading existing electrical systems, including:

Replace wires, switches, sockets and electrical panels.

Grounding performance for all types of buildings.

Implementation and maintenance of lighting for sports courts, gardens, and streets.

Increasing the connection (power) structures, single phase, three - phase.

Solution for overload / short.

Implementation of communication points, telephone, computer, TV, intercom.

Warranty on all electrical work for 12 months.

في المرة التالية التي تقوم بزيارة المنتدى سأكون مهتما جدا في ما تفعله، وإذا كنت مقيما الآن في المملكة المتحدة الصور على موقع الويب الخاص بك من المملكة المتحدة

 
Top