Shocks all round
Junior Member
- Joined
- Aug 23, 2009
- Messages
- 1
- Reaction score
- 0
How to get Zs at the board? i have fluke 1651 testerheadbang
Does it not come with instructions?How to get Zs at the board? i have fluke 1651 testerheadbang
Hi yer R.U.S. Just one point on your method. If earth Conductor is left connected to Earth bar there is still a possibility of parrallel paths through cpc to Extraneous conductive parts etc........what do you think ?Mains off, main bonds to services disconnected, earth croc clip on earth bar, live probe on incoming live, neutral probe on incoming neutral...... test.
You're right lol.... I stand corrected. Proper method would indeed be to remove the earthing conductor from the earth bar.... Applaud Smiley ... (having said that I have occasionally compared the readings and there was very little difference.)Hi yer R.U.S. Just one point on your method. If earth Conductor is left connected to Earth bar there is still a possibility of parrallel paths through cpc to Extraneous conductive parts etc........what do you think ?
Not at all a1 , despite being a spark for 18 years I would never claim to know it all or say I do everything right. I still make mistakes so I appreciate you mentioning it.Your welcome R.U.S ..and thanks for not taking offence , or taking it as criticism
just had to correct GH's error!!!X( X( ]The last three posts reminds me why this is the best forum in the world! UNIVERSE
Can I just add for the benefit of absolute clarity for eveyonebut that said ....
Most modern test meters will give some sort of error indication if polarity is arse about face!
You can't say " Face" on here, Specs.!!!
OMG the last posts were that polite I thought I was living in the 1940s.The last three posts reminds me why this is the best forum in the world!
Diolch yn fawr Mr Evans :^O ..... respect and good manners cost nothing .... bring back the 1940's ! Applaud SmileyOMG the last posts were that polite I thought I was living in the 1940s.Thanks awfully chaps, I,m not taking the wee-wee by the way, TTFN .
Yours most graciously
Deke
Deke's not Welsh..............Diolch yn fawr Mr Evans :^O ..... respect and good manners cost nothing .... bring back the 1940's ! Applaud Smiley
Enter your email address to join: