Outside Mains Sockets

[Andy™]

But how long had it been there?

sometimes only a few years, but the sheath has been damaged and waters got in

 

[binky]

sometimes only a few years, but the sheath has been damaged and waters got in

you mostly work on industrial sites though, where damage is more likley to occur.

 

[UNG]

you mostly work on industrial sites though, where damage is more likley to occur.

I don't think that is necessarily true as more consideration is given to the method of erection than it is in the domestic setting

 

[binky]

I don't think that is necessarily true as more consideration is given to the method of erection than it is in the domestic setting

Oh that's definetly true, I've spent 30 years in factories, and 20 years working in domestic. I've never seen rusted out swa in domestic.

Now if you think swa is not mechanically protected, then do pray tell us how you would install the cable?

 

[SPECIAL LOCATION]

seen plenty rusted galv in SWA

But how long had it been there?

I never figured out how this internal SWA joint at a domestic garage CU feeding a "summerhouse" outbuilding got so bad.. As the cable colours suggest it cannot be that old????

Unless "Bob The Builder" left the unterminated, unprotected end of the SWA, open to the elements for a long period before he got round to putting the roof on the external, remote, unconnected garage structure?

 

[Spoon]

Now if you think swa is not mechanically protected, then do pray tell us how you would install the cable?

IMO, if the SWA needs additional protection, you could put it in metal conduit.... I'm sure there are extra measures that could be added. Is it needed? Who knows... See my post 17
Or the OP may come back and give extra info...

 

[UNG]

Oh that's definetly true, I've spent 30 years in factories, and 20 years working in domestic. I've never seen rusted out swa in domestic.

Seen quite a few rusted out SWA's in domestic properties outside, garden and pond lighting being the favorites, a lot down to poor installation, leaky fittings or wrong glands

Now if you think swa is not mechanically protected, then do pray tell us how you would install the cable?

Without eyes on it is difficult as no one size fits all in the past I have installed SWA in conduit, deep channel, heavy duty cable capping to suggest a few ways