Salus It500 Installation

[kmacca]

Hello all,

In my wisdom I decided to go out and purchase a Salus IT500 in replacement for my existing Danfoss TP9000MA.

I currently have an S Plan set-up, but I'm a little confused with the wiring diagram and wondered if anyone could please help (as I don't want to be without heating during the xmas period).

I can very easily isolate the electrics, so when I purchased the new IT500, I thought (possibly foolishly), it would be as easy as swapping a few wires from the old set-up to the new.

If needed I will get a spark to do it, but if someone knows which wires go where - and is willing to share this info with me, then it would be greatly appreciated and I'll have a go myself.

Thanks in advance for any help.

Kind regards
Kurt


Below is the front wall plate of the existing Danfoss Programmable Timer.

http://docs.google.com/file/d/0B9VAbMO37i0gemd5V0pSQXMwRXM


Below is the back of the current Danfoss Programmable Timer.

http://docs.google.com/file/d/0B9VAbMO37i0gU2MzZHlMWjNkelk


Below = The existing wiring behind the existing wiring plate.

http://docs.google.com/file/d/0B9VAbMO37i0gWi1WY011Z2xCcG8


and finally the Salus IT500 Wiring Diagram,

http://docs.google.com/file/d/0B9VAbMO37i0gelc1UHdaYlh6aW8

 

[Sharpend]

It can be done but you will need to reconfigure the existing wiring, not ideally something a DIYer should tackle unless they have a reasonably good understanding of how what and why.