meady
Senior Member
- Joined
- Jun 19, 2009
- Messages
- 197
- Reaction score
- 0
Hi fellas, hope you are all enjoying your weekend
Did yet another cu upgrade today, big old house with multiple extensions over the years. Pretty much all the circuits were rings including all 4 light circuits. I installed a splitt load board with 3 socket rings, cooker, and utility room sockets on rcd side and put 5 rcbo in for the lights and smoke circuit. Anyway the smoke circuit kept tripping everytime I powered up
We checked all connections especially the neautrals in the consumer unit and the smoke detectors and all seemed fine.
By this time I had run out of light and the owners were going out so I said I will come back tomorrow to find the problem. Any ideas?
I will be testing tomorrow so no results to give.
Did yet another cu upgrade today, big old house with multiple extensions over the years. Pretty much all the circuits were rings including all 4 light circuits. I installed a splitt load board with 3 socket rings, cooker, and utility room sockets on rcd side and put 5 rcbo in for the lights and smoke circuit. Anyway the smoke circuit kept tripping everytime I powered up
We checked all connections especially the neautrals in the consumer unit and the smoke detectors and all seemed fine.
By this time I had run out of light and the owners were going out so I said I will come back tomorrow to find the problem. Any ideas?
I will be testing tomorrow so no results to give.