Spot the fault®

Talk Electrician Forum

Help Support Talk Electrician Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Feb 10, 2010
Messages
6,987
Reaction score
119
Location
Where the wild things are
Stopped in a well-known restaurant chain on the way home from swimming...

IMG_20160904_174013_zpsm0axwssg.jpg.33c7ba58e05daf94f2e181e5d0161163.jpg


 
Are you concerned at the light flexes going over what may be a sharp edge of cable tray?

Left hand light is not on the centreline of the cable tray.

Is that a smoke detector too close to the lamp drop? 

 

 
Last edited by a moderator:
That's 12" cable tray by the look of it, am I right in thinking that the run of FP200 that's up there should be separated from the lighting/power cables on that tray by at least 300mm? Which it obviously cant be as its on the same 12" tray?

 
Sorry I wish the picture could have been clearer, I thought I would look odd taking photos of the ceiling.

Other than the severe underuse of the tray, Im Probably being a bit pedantic...

The fittings further out, the flex is fed through the holes in the tray and the FP is secured using nylon cable ties which I thought at least some had to be metal.

:Sorry:

 
Top