Todays Find

[NozSpark]

What's wrong with this then



Thankfully it was only extended down to 1 double socket...

 

[Doc Hudson]

Looks like Live & Neutral from one cable go to two different cables. Your not isolating a conservatory supply are you.

Doc H.

 

[ProDave]

 Your not isolating a conservatory supply are you.

Doc H.

PMSL   :slap

 

[NozSpark]

:shakehead

That plus a non operating RCD whilst hooking up a boiler... Thankfully my work didn't need RCD

 

[Blue Duck]

What's wrong with this then

http://i222.photobucket.com/albums/dd101/nozspark/IMAG1163.jpg

Thankfully it was only extended down to 1 double socket...

You missed the

tags and it takes ages to load a picture on photobucket?

 

[NozSpark]

You missed the

tags and it takes ages to load a picture on photobucket?

Changed that in my op now

 

[Badger]

Im sorry ill check better next time :coat :slap

 

[Andy™]

What's wrong with this then

Thankfully it was only extended down to 1 double socket...

the cupboard covering it fell off the wall?

 

[binky]

:slap

 

[ProDave]

No one mentioned the missing grommet?

 

[Blue Duck]

We have to use grommets now too FFS!

 

[Andy™]

We have to use grommets now too FFS!

yes, but they need to be LFB approved

 

[Rob_the_rich]

We have to use grommets now too FFS!

Doubt if grommets are needed here, unlike in a cavity wall, the cables are unlikely to move once installed, so the knockout edge would not cut through the sheath and insulation.

Definitely not needed if the cables were plastered-in right up to the box, without conduit, as there would be zero possibility of movement after installation.

Not saying they shouldn't be used, damage might occur during installation, just that they need not be used.

 

[thebight]

As a trainee, this is the level of workmanship I aspire to.

 

[NozSpark]

As a trainee, this is the level of workmanship I aspire to.

Like I said before.... I was lucky to find this as I was only there to connect the boiler up and this is right next to it..

Let's just say that it's wired up correctly now with crimps on the through joints and lever wagos where I connected my switched fuse spur

 

[Murdoch]

Not covered in layers and layers of tape?