Wylex REC Isolator

[a1]

Hi all,

I need a Wylex REC Isolator.

Rather than split the tails via a Henley Block, I was thinking about having the Tails from the Cutout enter the Wylex REC Isolator (line & Neutral), and to have two sets of tails from the other side. One pair to the Main CU and the other pair to a 2 way CU.

I know they aren't the wylex REC2 Isolators.

The only other range that I could find is the Wylex REC3S Isolator, shown below.

Is that the one?

Thanks,

Admin.

 

[batty]

Could use a four pole one and put a link between.

 

[Andy™]

as above - use a REC4 and a bit of busbar to link the teminals

 

[a1]

Found one, but I couldn't find any "Copper links" online? It's getting late.

 

[initforthemoney]

http://uk.rs-online.com/web/search/searchBrowseAction.html?method=getProduct&R=0569675

 

[a1]

http://uk.rs-online.com/web/search/searchBrowseAction.html?method=getProduct&R=0569675

I meant the "Copper Links", sorry init. I have rephrashed my post.

 

[Andy™]

a spare bit of busbar from a CU would do the job

 

[muffin]

agree with above you normaly have a spare bit from the mk boards.

probably got some hear if you have not, let me know.

regards andy

 

[SLIPSHOD & SLAPDASH]

Missed this thread the first time round. I have not used the REC 4, Can anyone confirm you can easily get 25mm tails and a copper busbar in the terminals.

 

[Andy™]

Missed this thread the first time round. I have not used the REC 4, Can anyone confirm you can easily get 25mm tails and a copper busbar in the terminals.

just for you slip, ive just tried it. 25 & 35 fit no problem

used some wylex busbar, the angled type so its more out the way