2 pole RCBos & prices

[kme]

I`m just pricing up a job at the mo, where I want to use individually switched outlets, via RCBo - they need to be DP.

OK. Using "electrica" software, I located the Hager units at

 

[ElectekAir]

No have never used them before but the prices are good thanks for the link:Applaud

 

[kme]

Having just been through their site, comparing prices, all I can say is ....WOW

20mm PVC conduit fittings (boxes etc -

 

[ElectekAir]

Having just been through their site, comparing prices, all I can say is ....WOW20mm PVC conduit fittings (boxes etc -

 

[Sidewinder]

You spotted that bit too, good!

Thought you were gonna allow for a 3ph supply if it's the same job I am thinking about, you'd thus need a board to go with these that will take the 2 & 3 pole units?

O)

 

[kme]

The TP supply will be on 3 no SP RCBos mate - unless it needs a 4th wire......at which point I`ll have to provide it with a 4 pole RCBo

I`m going to use a hager weatherproof enclosure, allowing me as many ways as I deem necessary mate

n.b. Still hoping someone has used this company, or manufacturer????

KME

 

[SLIPSHOD & SLAPDASH]

We have been using a bit of Doepke kit recently. Very sturdy stuff. One of the few makes i could get some 3 phase (4 pole) 100mA time delayed Rcds from.

I had to make up my own board for a main switch and 2 of those Rcd's recently, based on a very large insulated box. This was for a TT system as i could not find any insulated enclosures that had room to terminate a 4 core 50mm Swa & house 3, 4 module units and a connection box. Does any one have any links or have had similar jobs ?

 

[batty]

We have been using a bit of Doepke kit recently. Very sturdy stuff. One of the few makes i could get some 3 phase (4 pole) 100mA time delayed Rcds from.I had to make up my own board for a main switch and 2 of those Rcd's recently, based on a very large insulated box. This was for a TT system as i could not find any insulated enclosures that had room to terminate a 4 core 50mm Swa & house 3, 4 module units and a connection box. Does any one have any links or have had similar jobs ?

I have used doepke stuff seems ok, at the time they did not do b type Rcbo's

so ended up using wylex Rcbo's which fitted. They do 500 mA time delay 4 pole Rcd's which was handy for the job I was doing. There stuff also seems reasonably priced.