3D Printer Enclosure

Talk Electrician Forum

Help Support Talk Electrician Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I’ll take a look inside mine at weekend and post some pics if needed. Are the components readily available? 
 

which neck of the woods are you in? 

blimey that is subtle. 


Sevenoaks & London. The caps have little crosses on top, it's like the weak point so they just "dome" rather split with a bit of force. 

Bit different to the bigger dielectric oil etc filled ones, they can really go (bang). 

Yes, generally bits are easily available.

 
Last edited by a moderator:
So pics as promised, no sign of Caps being blown? 

well I would if I could upload them? I get a limit of 501kb yet each pic is a few Mb? 
how do I reduce the size of pic?

 
Last edited by a moderator:
Here are the Pics Thanks to Andy, top and two sides, cant see anything obvious?

Thanks @Murdoch probably just as easy, didn't give that a thought TBH.

With the cover off and the unit plugged in and switched on I get the LED flash once GREEN, then I can hear a slight continuous buzzing (as though a bee has been trapped in a glass box?), putting the battery into the charger gives no lights or anything?

 
Top