electrician786
Senior Member
- Joined
- Jan 22, 2012
- Messages
- 208
- Reaction score
- 1
I had to do a job today, I had to install and connect some tails and earth from British gas isolator to the consumer unit. The problem was that I found no MET supplied by British gas / DNO, so I phoned the British gas engineer and he told me to just take the 100A fuse out and then take off the cover over the neutral off and connect my earth, it was a pme system. I told him the fuse was sealed and that I was not permitted to cut the seals, he said its not our responsibility to leave an earth, it was the DNO responsibility. In the end I had to call british gas and arrange for another visit so they can install an earth. Right old mess.