Correct Charger For LED Worklight

[OnOff]

Anyone got one of these?

 












It's not obvious what charger it needs from the label. Hoping if someone has the same one that they can take a pic of the label and I might have something that'll match in the box of assorted wall warts.

 

Cheers 

 

[kerching]

https://www.ebay.co.uk/itm/REPLACEMENT-FOR-12V-1A-AC-DC-ADAPTOR-POWER-SUPPLY-FOR-YHSAFC1201000UK-/401496717438

Standard 12V 1A

 

[Evans Electric]

Sorted !!! :^O

 

[kerching]

I had the cunning  plan of googling the charger part number !

but you can near enough guess it frommthr part no. Anyway

 

[Blue Duck]

From what I recall Netgear router power supplies are 12v 1a.

 

[Andy™]

had similar before, 12v. chopped the plug offand wired to a 12v supply in the van

 

[OnOff]

I had the cunning  plan of googling the charger part number !

but you can near enough guess it frommthr part no. Anyway

Cheers. I just seem to remember a few people buying these or similar a while back. Think I saw the one in your link in the box of assorted along with the many BT router psus, Binatone & Cobra walkie talkie ones etc! 

EDIT: Nope, must have been wishful thinking. But a BT Home Hub 3 12V 1A one fits and we're charging. I remember now there was an A & B model hub and though ostensibly the same looking they had different size DC jacks. I'll look again when sober.

 

[Evans Electric]

I just received  from Amazon, a versatile charger with 6  interchangeable  plugs  to replace what powers my John Lewis clock radio .     Thought  the little jack plug had failed  , turned out to be the 6V power socket in the radio  :C   Took it to bits ...nightmare  to replace the plug . 

I was unsure as to whether the device , called a charger,  was OK for continuous use powering a radio .

Just to add that although out of guarantee , John Lewis offered to pay half of the cost of the charger as they don't do a replacement . 

 

[OnOff]

I just received  from Amazon, a versatile charger with 6  interchangeable  plugs  to replace what powers my John Lewis clock radio .     Thought  the little jack plug had failed  , turned out to be the 6V power socket in the radio  :C   Took it to bits ...nightmare  to replace the plug . 

I was unsure as to whether the device , called a charger,  was OK for continuous use powering a radio .

Just to add that although out of guarantee , John Lewis offered to pay half of the cost of the charger as they don't do a replacement . 

I've done the DC jacks on half a dozen laptops. Bitch sometimes! 

 

[Evans Electric]

Thanks for that  mate .     I'd have to do it under a big magnifying glass  I think  and then its really small .     Would I even get the part .

Its a small DAB  clock radio with a nice mellow tone , not that tinny row you get with small speakers   but I shall have to get another  ,  not the same if the power socket is dodgy though . 

 

[OnOff]

Thanks for that  mate .     I'd have to do it under a big magnifying glass  I think  and then its really small .     Would I even get the part .

Its a small DAB  clock radio with a nice mellow tone , not that tinny row you get with small speakers   but I shall have to get another  ,  not the same if the power socket is dodgy though . 

Often fitted too with high melting point solder. Worst one I did was the lad's tablet.

 

[SLIPSHOD & SLAPDASH]

I 'adopted' the same light  after  a shop fitout  (no one  claimed it) and it was dead so i wacked on a 12v 1a wall wart and its been fine for 6 months. I have  noticed  a lot of rechargeable stuff now needs a higher charge voltage than a few  years ago. This ranges  from a Metral tester  with 6 x 1.2 AA batts   that was supplied with  a 16v charger & a similar but  larger site light having a 12v for 7v batts

 

[OnOff]

Tbh I try and mark all my own wall warts with nail varnish as I get the "tool". Just done the BT one for the light. I have to ask the 11 year old for whatever cast off colour she's gone off of when I run out!

 

[kerching]

I got a gold/silver/copper set of Sharpies

absolute godsend for marking stuff up....I have seen white sharpies but never got around to buying one.

valve operated paint pens are very good as well....just take longer to dry . I used to make all the Diving gear with them

 

[OnOff]

My Dacron Dalo pen dried up, that was good for marking stuff up. That was superb.