Earth rods

Talk Electrician Forum

Help Support Talk Electrician Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
When you checked the Ze did you isolate the supposedly incoming earth from the rod before checking, and are you sure it is the earth from the rod and not a water or gas bond cable?
 
The SDS does not need a risk assessment its inert until in use, a Hazard analysis will show that there is a possible risk from in ground services and that a CAT scan would be needed, then a risk assessment prepared, once the level of risk is determined a the Method Statement will show the way forward. 🤔
 
Last edited:
Top