sparky marky
Junior Member
- Joined
- Nov 29, 2010
- Messages
- 6
- Reaction score
- 0
Hi all, i'm a qualified spark and have been asked to help out my local social club (literally across the road!) i've recently wired two room stats for the two separate zones up and down because there was a lot of dispute about the temperates, upstairs is a snooker room and they aren't happy with running the central heating from a programmer because people don't often go up there and they don't want to heat an empty room but also don't want to have to switch the heating on manually when people come in (plus it'll take half hour old to warm up anyway).
What i have suggested one night after a few Guinness is to put a programmable room stat upstairs and program that to heat up every day for one hour when they open, then wire a PIR to take control after that meaning the heating will switch off if no one goes in there or stay on if they do!
my question is whether if i common the two switch lines (room stat and pir) will the back feed on the programmer cause it to break as they aren't too cheap! by this is mean connect the switch line from the pir to the switched terminal of the programmable room stat?!
open to suggestions Guinness
What i have suggested one night after a few Guinness is to put a programmable room stat upstairs and program that to heat up every day for one hour when they open, then wire a PIR to take control after that meaning the heating will switch off if no one goes in there or stay on if they do!
my question is whether if i common the two switch lines (room stat and pir) will the back feed on the programmer cause it to break as they aren't too cheap! by this is mean connect the switch line from the pir to the switched terminal of the programmable room stat?!
open to suggestions Guinness