Light fitting suggestion?

[Murdoch]

Got a client who has a lighting circuit looped that the lights ............ they want a pendent replaced by a more elegant fitting like a bulkhead / bathroom type light ......... its not a big room and all the fittings I've looked at "assume" that the cable coming to the light will be a single T&E

Thanks

 

[Andy™]

its not a big room and all the fittings I've looked at "assume" that the cable coming to the light will be a single T&E

Thanks

lucky you. plenty room in there. most these days assume the wiring is a bell wire and make the termianls sized to suit that...

 

[phil d]

There's a nice round light fitting made by Ansell, that might do the job, if you have a look

http://www.anselluk.com/en/product/ADILED1

 

[SPECIAL LOCATION]

lucky you. plenty room in there. most these days assume the wiring is a bell wire and make the termianls sized to suit that...

Where you finding terminals that big????

Most would be a struggle to get a CAT5 or Telephone wire in!!!!!!!!!!!!

:shakehead   :slap

When did you last use the connectors that come with a new light fitting??

opcorn  

 

[Evans Electric]

Be prepared to re- connect the looped lighting in an suitable J/B  above the fitting ,  with a bit of  0.5mm  flex  down to the light  & possibly scrap the supplied connectors .

Theres a whole range of useful  LED   fittings now ,  as the one  Phil shows .  

 

[Murdoch]

Be prepared to re- connect the looped lighting in an suitable J/B  above the fitting ,  with a bit of  0.5mm  flex  down to the light  & possibly scrap the supplied connectors .

Theres a whole range of useful  LED   fittings now ,  as the one  Phil shows .  

Hum ............ after opening 3 units at a wholesalers today I selected a unit where I can use wago's to deal with all the cables inside the light.......... happy days (fingers crossed)

Where you finding terminals that big????

Most would be a struggle to get a CAT5 or Telephone wire in!!!!!!!!!!!!

:shakehead   :slap

When did you last use the connectors that come with a new light fitting??

opcorn  

or the nasty cheap soft fixing screws!

 

[Murdoch]

this is the one I used , lots of space inside to deal with the loops etc

 

[Blue Duck]

****esbridge... expect to go back in 3 months...

 

[kerching]

****esbridge... expect to go back in 3 months...

So when did they improve their quality control,then?

3 months?........I thought they only had an "Ar Street" warranty

total utter pile of ....

 

[NozSpark]

So when did they improve their quality control,then?

3 months?........I thought they only had an "Ar Street" warranty

total utter pile of ....

Can't say that you're not telling the truth........ utter 

 

[Murdoch]

****esbridge... expect to go back in 3 months...

If this was being installed outside I would agree - some of their outdoor stuff is real carp ............ but as its indoor I'm happy about t