Solar mark
New member
- Joined
- Jun 23, 2018
- Messages
- 3
- Reaction score
- 0
Has anyone come across a pv system (4kw kioto 2 x 8 strings) that is the majority of the time producing 1/2 the power, then momentarily the inverter (Eversolar) displays full power then steadily drops down again to roughly 1/2 the expected output.
at first I thought this was our first PID fault ? Or the other thought I had was a faulty inverter ?
when I did I voltage Check on the Dc power coming into the isolator we were getting a steady voltage
This was a system we were asked to re-fit after a new roof had been installed
Any feedback would be welcome
at first I thought this was our first PID fault ? Or the other thought I had was a faulty inverter ?
when I did I voltage Check on the Dc power coming into the isolator we were getting a steady voltage
This was a system we were asked to re-fit after a new roof had been installed
Any feedback would be welcome